Revised = Red

General Conditions (revised February 15, 2010)

Material Specifications

• 107-00: Specifications for Coated and Cement-Lined Steel Pipe and Fittings
• 109-09: Precast Concrete Manholes (10.5.09)
• 110-05 : Ductile Iron Pipe for Water Distribution Service (11.12.04)
• 111-09: Ductile Iron Fittings (12.2.09)
• 119-09: Specifications for Materials (12.2.09)
• 120-09: Specifications for Construction (12.2.09)
• 121-99: Cast-in-Place Concrete
• 123-07: Polyethylene Pipe and Fittings for Water Distribution Service (1.8.07)
• 126-06: Specifications for Polyvinyl Chloride (PVC) Pipe for Water Distribution Service (1.23.06)

Construction Standards

• E.225.2: Welding Procedure -- Shielded Metal Arc Welding (11.30.09)
• E.225.3: Welding Procedure -- Gas Metal Arc Welding (8.1.06)
• E.225.4: Welding Procedure -- Oxy-Acetylene Welding (8.1.06)
• E.227.0: Qualification of Welders (11.30.09)
• E.229.0: Visual Inspection of Test Welds (6.5.05)
• 0.2.1: Installation of Erosion and Sediment Control (1.22.08)
• 1.4.0: Pressure-Testing Water Mains (4.10.07)
• 1.6.1: Air Taps on Ductile Iron, Cast Iron and PVC Water Mains, 16-inch and Smaller (1.22.08)
• 1.6.2: Sample Taps on Ductile Iron, Cast Iron and PVC Water Mains, 16-inch and Smaller (10.30.09)
• 1.8.1: Precast Vault Installation -- Water (1.31.10)
• 1.8.4: CC Box Installation -- Water (1.22.08)
• 1.8.5: Typical CC Box, 24-inch Round Iron or Square Roadway Box Installation in Gravel or Dirt Road Surfaces (12.15.00)
• 1.8.11: Typical Backing Blocks for Water Mains (2.1.06)
• 1.8.12: Immediate Support Backing Blocks (12.15.00)
• 1.9.1: Swivel x Solid Adapter for 6-inch to 12-inch Water Mains(4.1.03)
• 1.10.1: Excavations for Tapping Sleeves and Tees (12.15.00)
• 1.11.1: Backfill Compaction for 16-inch and Smaller Water Mains (1.22.08)
• 1.11.2: Pipe Embedment for 16-inch and smaller water mains (2.1.06)
• 1.12.1: Installation of Polyethylene Encasement on Cast or Ductile Iron Pipe and Fittings (12.15.00)
• 1.13.1: Water Mains Crossing Sanitary Sewers (12.3.09)
• 1.14.1: Installation of Trace Wire on Water Mains (1.22.08)
• 2.2.0: Gate Valve Installation on 16-inch and smaller PVC water mains (1.22.08)
• 3.0.1: Hydrant Installation on 6-inch, 8-inch, 12-inch and 16-inch Mains (1.22.08)
• 3.1.1: Obsolete Fire Hydrants (1.14.09)
• 5.5.3: Use and Installation of Retainer Glands (2.1.06)
• 8.2.2: Standard Installation of a Double Insulating Washer Flange Insulating Set (12.15.00)
• 8.3.3: Trace Wire, Anode and Test Lead Attachment Methods for Steel, Ductile Iron and Cast Iron Water Mains (1.31.10)
• 8.5.2: Application of Tapes and Wraps for Water Pipeliness (10.30.09)

Drawings

• 125.06.6: 6-inch CI Tube for Contracted Projects (11.03.05)
• 125.06.8: 8-inch CI Tube for Contracted Projects (11.03.05)
• 416128: Adjustable Valve Box (10.7.09)
• 416206: 24-inch Manhole Ring and Cover (11.10.93)
• 416207: 24-inch Manhole Ring and Cover (3.13.00)
• 416232: 36-inch Manhole Ring and Cover (2.10.04)